Spey clave

tiistai 22. maaliskuuta 2011

Testing the dubbing brush machine.

Even if it´s too early to say that this machine works I want to share my first test experiences with you.
First of all I use a dubbing tool(not sure about it´s English name)to spin the brush with.

Attach the wire to the hook on the tool and take it over the "table" behind the other hook.

Then add some material,in this case Ice wing with a dash of something pink...

Then pull the wire over the materials and fasten it on the hook of the tool.

Then spin carefully 4-5 times the tool and after that move the "table" and after that spin again.

At least with Ice wing it´s very important to remember to sometime use the tying needle or the scissors to solve the material,otherwise you´ll have a Ice wing worm,not a brush.

Then it´s a open highway....just spin some time(remember to solve the material at times)and cut the wire near both hooks and.....you´ll have a complete dubbing brush.

Even if there´s some issues Ithat needs to be solved this test was very promising and I will still do some more tests with Marabou,Flashbou ETC.ETC.....
Stay tuned.....Cheers.

3 kommenttia:

  1. i made one a couple months ago . This is the one I made from this video. http://vimeo.com/3207607

  2. Pretty slick...what wire are you using?

  3. Jeff,Actually I dont know exactly,it should be stainless.It´s very thin but pretty stiff.
    Hopefully I find same stuff somewhere after I´ve used this.